The Belt Tension Tester OTBT2880 used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement. It can be used to measure and adjust the tension of timing and auxiliary belts fitted to motor vehicles and other machines.
- Tension can be displayed in a variety of standard and manufacturers' units.
- Tension limits can be set into the instrument, either manually or automatically.
- During belt tension measurement and adjustment, the belt tension is displayed. A visual and audible indication of whether the tension is within or outside the set limits is also given.
- The selected tension limits, measurement units and calibration parameters are stored in The memory of the tester.
- Use “USB data output” and “RS-232 data output” to connect with PC.
- Display:4 Digits 10 mm LCD,
With Colored LED indication of High, Low and OK
- Measurement Range: 0 ~ 750 N ( Newtons )
0 ~ 120 lb ( Pounds )
0 ~ 77 kg ( Kilograms )
0 ~ 114 Seems
- Belt Width:Up to 36 mm
- Overload Alarm:750 N
- Maximum Load:850 N
- Resolution:± 1 Newton or 1 Least Significant Digit of Other Units
- Accuracy:± 5 % of full-scale
- Data Output:USB, RS-232, Bluetooth
- Audible Warning:Piezoelectric Sounder
- Power Supply:4 x 1.5 V AAA Size (UM-4) Battery
- Battery life Approximately 100 hours continuous operation
- Dimensions: 135 x 62 x 33 mm
5.3*2.4*1.3 inch
- Weight:335g (not including batteries)
- Accessories included:Measuring head ---------1pc
Carrying case------------1pc
Operation manual-------1pc
- Optional accessory: Cable and software for RS232C and USB
